After 70 years of electronics manufacturing, our story continues as part of Inission. Together, we combine our experience with the strength and capabilities of a larger group to deliver EMS Excellence.

That means being your partner throughout the product life cycle, combining expertise, flexibility and efficient processes to deliver high-quality, cost-effective solutions tailored to your needs.

#NewChapterNewStory

Chapters: Development / Prototypes / Industrialization / Manufacturing / Aftermarket

Development

We support product development from concept to production, combining hardware and embedded software expertise with practical engineering experience.

Through design optimisation, prototyping and test development, we identify potential issues early and improve manufacturability, quality and performance. Our goal is to create reliable, cost-effective products ready for efficient series production.

Development capabilities

Hardware
Show
Close
  • Custom test fixture design
  • Production tooling design and fabrication
  • Electronic system design*
  • Schematics and PCB layout*
  • Prototype development and validation*
*Available through Inission group network
Software
Show
Close
  • Embedded software development
  • Firmware development
  • Test automation
  • Hardware–software integration
  • Application software development*
*Available through Inission group network
Project management
Show
Close
  • Requirements management
  • Test concept development
  • Production transfer coordination
  • Technical documentation & coordination
  • Product development management*

*Available through Inission group network

Beyond development
Show
Close
  • Design for manufacturing (DFM)
  • Design for assembly (DFA)
  • Design for test (DFT)
  • Design for cost optimisation
  • Technical requirements analysis
  • Design verification and validation
  • Engineering change management
  • Production readiness and ramp-up
760
Custom tools developed/year
14
Test solutions developed/year
8
Dedicated R&D engineers

Prototypes

We deliver prototypes quickly, with expert feedback and improvement suggestions to help you verify your design and optimise manufacturability, quality and cost.

Prototyping capabilities

High availability
Show
Close
  • Dedicated prototype lines
  • Flexible prototype production
  • Flexible production volumes
  • Access to engineering expertise
  • Low volume component procurement
Fast deliveries
Show
Close
  • Flexible prototype scheduling
  • Fast component procurement
  • Quick production setup
  • Efficient prototype assembly
  • Prioritised delivery planning
Proactive improvements
Show
Close
  • Prototype evaluation and feedback
  • Design and process FMEA
  • Design for manufacturing (DFM)
  • Manufacturing cost optimisation
  • Design optimisation for serial production
Beyond prototypes
Show
Close
  • Access to the Inission group network
  • Manufacturing locations close to you
  • Direct collaboration with development teams
  • Access to complimentary group expertise
  • A smoother transition to serial production
    Scalable manufacturing capacity
    Reduced risk during production ramp-up
    Supply chain support as production scales
151
Prototype builds/year
13
NPI/month
12
Dedicated engineers

Industrialization

At this stage, our customer team works with supply chain experts to optimise material selection, availability, production efficiency and capital retention throughout the product’s life cycle.

This systematic approach helps bring products to market faster, with the right quality and a competitive price.

Industrialization capabilities

Test development
Show
Close
  • Custom test equipment and fixtures
  • Software and test script development
  • In-Circuit test (ICT)
  • Functional test (FCT)
  • Automated test solutions
  • Test system design and integration
Supply chain management
Show
Close
  • Component sourcing and procurement
  • BOM analysis and optimisation
  • Material allocation management
  • Alternative component evaluation
  • Material demand planning
  • BOM cost financing
Design improvements
Show
Close
  • Design for manufacturing (DFM)
  • Design for assembly (DFA)
  • Design for testability (DFT)
  • PCB design review
  • BOM optimisation
  • Manufacturing cost optimisation
Beyond Industrialization
Show
Close
  • In-house test equipment design and production
  • Integrated test hardware and software
  • Component-level testing  to functional testing
  • Custom tooling for manufacturing processes
  • Design review and manufactur ability expertise
  • Integrated supply chain and manufacturing support
  • Combined purchasing power across Inission group
  • Clear path from industrialisation to serial production
14
Test systems developed/year
200+
Approved suppliers
332
Products optimised for production
8
Test engineering specialists
90%
On time components
10%
Optimisation target/year

Manufacturing

We tailor production to your product and select the right Inission factory to ensure efficient volume production, high quality, on-time delivery and optimal total cost.

Through standardized processes and traceability, we continuously improve quality, identify errors and ensure a reliable partnership.

Manufacturing capabilities

PCBA
Show
Close
  • SMT assembly
  • THT assembly
  • Reflow and wave soldering
  • Selective and manual soldering
  • 3D automated optical inspection (SPI+AOI)
  • Conformal coating and compound filling
Box build
Show
Close
  • Electromechanical assembly
  • Cable and wire integration
  • Ultrasonic welding
  • System testing
  • Enclosure integration
  • Full box-build assembly
Sheet metal solutions*
Show
Close
  • Laser Cutting
  • Sheet metal bending
  • Welding and joining
  • Metal Enclosure Fabrication
  • Press punching and forming
  • Surface Treatment and Finishing

* Available through Inission group network

Beyond manufacturing
Show
Close
  • High-mix to high-volume manufacturing
  • Lean manufacturing and continuous improvement
  • Integrated quality assurance
  • Traceability to component level
  • In-house team of 20 engineers
  • Custom test equipment and test system development
  • IPC-A-610 Class II & III qualified operators
  • Higly experienced supply chain management team
3.03M
Total units /year
1.22M
Box build units /year
1.6M
Sheet metal parts /year
4
SMT lines
5/80
Box build lines /variations
3800
Tons of steel used /year

Aftermarket

As technology evolves, we help you extend product life cycles through proactive aftermarket planning, last-time-buy management and component lifecycle management. When the time comes, we help you transition to the next product generation, protecting your investment and supporting long-term partnerships.

Aftermarket capabilities

Lifecycle management
Show
Close
  • Product lifecycle planning
  • Obsolescence management
  • Last-time buy (LTB) management
  • Product lifetime extension*
  • End-of-life (EOL) redesign*

* Available through Inission group network

Redesign
Show
Close
  • Hardware updates
  • Software updates
  • Obsolete component replacement
  • Product variant adaptation*
  • EOL component redesign*

* Available through Inission group network

Repair / Refurbish
Show
Close
  • Electronic product repair
  • Product refurbishment
  • Hardware modifications and upgrades
  • Software updates
  • Functional testing
Beyond Aftermarket
Show
Close
  • Supporting informed lifecycle decisions
  • Adapting products to changing requirements
  • Sustainable product life extension and reuse
  • Enabling informed replacement decisions
  • Product rework database
  • Facilitating component reuse
  • Responsible product end-of-life management
  • Tracking repair history and outcomes
98K
Products repaired or modified/year
99.5%
Repair effectiveness
5
Maintenance technicians

 

Contact

Curious about our electronics expertise or how we deliver EMS Excellence? Have a project or idea to discuss? Don’t hesitate to call me.
Donatas Jakubonis
Chief Sales Officer